Riding the streets on a skateboard is not only fun it also trained you how to balance your body on a skateboard. It is a great methodology to relieve stress. It is a most favored hobby.
In this article, we will explain how to mount a skateboard on the wall. There are several methods of mounting a Skateboard on a wall. But we will discuss two methods:
- Hanging Skateboard With Nails
- Hanging Skateboard Without Nails
Why Mount a Skateboard on the Wall?
You can mount the skateboard on the wall for several intentions. You can use it for showing how much you love Skateboarding. This act may be for illustrating your wall. It is an ingenious method to decorate your room walls with a Skateboard that is not in use.
If you are a Skateboarding lover then, I am sure that you have a collection of Skateboards. If I am true then, maybe, You have faced a problem storing them in an assured spot because they take up a lot of free space in your room.
The easiest way is to put a down skateboard under your bed. But I never offer you that. Because, If you are a true Skateboarding lover then you will never do this.
Skateboards also deserve a site to hang. Mounting a Skateboard on the wall is great to protect your Skateboard from moisture damage. It will also settle your space issue.
Mount Skateboard On Wall Without Using Nails
If you want to mount your skateboard without damaging the wall then, this guide is only for you. It is the easiest process and also saves a lot of your time. Follow this process if you want to hang the skateboard for short time i.e for a week or fortnight.
However, if you like to hang it permanently then the second guide is best for you.
What do you need to Mount Skateboard on Wall?
- Skateboard
- Measuring Tape
- Mark Pencil
- Fishing Line
- Adhesive Hooks
Mount the Skateboard With Fishing line
1: The first thing that you need to do is to trucks the skateboard off before hanging it. This is because the trucks may have weight more than a deck. The weight of trucks will uproot the Adhesive Hooks, making it more challenging to hang them.
2: Next, pick up your measuring tape and the Mark Pencil to mark the spot where you exactly want to mount the skateboard on the wall.
3: Now, Clean a particular area of the wall with Cotton Paper. Dip it into the Vinegar and rub the area where to mount the Adhesive Hooks. Use Vinegar because it dries faster than alcohol.
4: Mount the two adhesive hooks left to right if you want to hang the skateboard horizontally. Make sure the adhesive hooks are parallel to each other. On the other side, if you want to hang the skateboard vertically then only one adhesive hook can use to hang it.
5: Hold the Fishing Line and pass it through the Holes of the Deck. Make sure the upper side of the Deck is in a downward direction. Now pass the Fishing Line back toward another adjoining hole as the Deck does not faces you.
Do the same process on the other side of the Skateboard. Cut the fishing line of 1 foot(0.30m).
If you want to use your Skateboard after some time then, never tighten it firmly. Granny knot the Fishing line will save you time as well as energy to open the enclosure.
.jpg)
6: Final step is to grasp the fishing line and pull the skateboard towards the adhesive hook that has mounted on the wall. Make sure the Fishing line is not bending because a loose line will not strengthen the Deck with the wall. it shows an attractive manner.
2: Mount Skateboard On Wall by Using Nails
If you want to hang your skateboard permanently then you have to choose a perfect guide. A true skateboarding enthusiast would never part with the skateboard they had ridden the most. You can permanently hang your old skateboards in your bedroom once they are odor-free as a fix for this issue.
What do you need to Mount Skateboard on Wall?
- Measuring Tape
- Mark Pencil
- Nails or Screw
- Screwdriver, Hammer, or Drill
1: The first thing that you need to do is to trucks the skateboard off before hanging it. This is because the trucks may have weight more than a deck. The weight of trucks will uproot the Adhesive Hooks, making it more challenging to hang them.
2: Next step is to mark the point where you wish to permanently Mount your Skateboard on your Wall. Draw two parallel verticle lines on the wall using a pencil. after doing this, draw two horizontal lines from the first line to the second.
Now draw a circle around the precise point where the horizontal and verticle lines intersect with each other. Before you drill, Check the alignment of the location that you marked on the wall.
3: Get a nail 2 inches(50 mm) in size and hammer it at the precise location on the Wall. Hammer the nail firmly in the straight direction. Don’t drive the nail as its head is flush with the Wall.
Now there is a little space between the Wall and the head of the nail. This little space will use to tie up the Fishing line on the nail.
4: By using a pair of scissors cut off the Fishing line of length 0.30mm. Feed the Fishing line through one hole of the Deck and again pass the Fishing Line back toward another adjoining hole.
As you know, the Fishing line feels slippery but never try to tighten it firmly because, after some time, When you try to lose it then it will waste your time as well as energy. That is why I suggest you that tie it in a knot that will keep it in place. It looks like a granny knot.
Don’t tie it too securely to the deck’s holes to make hanging easy. Rather, leave some space between the knot and the deck.
5: Final step is to pull your Skateboard from the fishing line and then wrap up the Fishing line around the shank or below the head of the nail. Hammer the nail’s head once more to finish it off.
Make sure the angle of the display Skateboard is 90 degrees (horizontal) or 180 degrees (verticle) or as you want. Moreover, If the Deck is floating then it will have a poor effect on the display of the Skateboard.
How to Hang Skateboard With Wheels on Wall
You can’t stop skating for a while if you enjoy skateboarding as a passion and it is impossible for skateboarding lovers to take a long break from skating. In the above two guides, we have covered mounting the Skateboard after removing its trucks.
Now you will learn about how to Hang a Skateboard with Wheels on the Wall. We will hang the skateboard on the wall by using Hooks which is not a time taken process. Only five minutes of your time are required.
You can’t stop skating for a while if you enjoy skateboarding as a passion and it is impossible for skateboarding lovers to take a long break from skating. In the above two guides, we have covered mounting the Skateboard after removing its trucks.
Now in this guide, you will learn about how to Hang a Skateboard with Wheels on the Wall. We will hang the skateboard on the wall by using Hooks which is not a time taken process. Only five minutes of your time are required.
What Will You Need?
- Adhesive Hooks
- Fishing line
- Pair of scissors
1: The first step is to point out the spot on which you wish to Mount the Adhesive Hooks to Hang the Skateboard on the Wall. Clean the particular area of the wall by using a cotton cloth after dipping it in a vinegar solution.
2: Next pick up the adhesive hooks and stick the adhesive hooks to the wall. Make sure the adhesive hooks are firmly stuck on the wall and the adhesive hooks are adjacent to each other.
3: Now measure the distance between the wheels of a front truck of the skateboard. It will help you to find how much length of the Fishing line is required to hang the Skateboard on the Wall.
4: Measure the Fishing line of length 650mm and cut it with scissors. Tie a knot at both ends of the Fishing line. It prevents it from frying. After doing it, pass the Fishing line below the wheels through the holes on the deck.
5: The last step is to make a granny knot on both ends of the fishing line and pass the tip or eye of the adhesive hooks through the granny knot’s hole. Now we have done! The Fishing line is trying to hang your skateboard with the Wheels.
Conclusion
We believe you now understand how to mount a skateboard on a wall. If you wish to hang a longboard on the wall, you can do so by using the guides and methods that had described above in this article.
If you have more related questions about how to remove the adhesive from the wall then cross-examine our team by leaving a comment in the comment box. Our team will assist you in resolving your problem.
FAQs
What is the best way to balance on a skateboard?
There is no formula for it. JUST DO IT! is the only thing that teaches you how to balance on a skateboard. Do more practice, and get a better result. Roll the skateboard on the plane ground much as you can.
Is it safe to ride a skateboard without wearing a helmet?
Skateboarding is an extreme risk involving passion. While skateboarding, there is a great risk of death. If you don’t wear a helmet then it may cause a savior’s head injury. That is why never forget to wear a helmet before skateboarding.
What is the best way to stop a skateboard?
In a powerslide, you turn the board while keeping all of the wheels in place, and it slides directly up against the current. Although this is the most efficient technique to stop or slow down, it takes practice to become used to it and be able to do it well.
What is the age to stop skateboarding?
According to the American Academy of Pediatrics, a child 1-5 years old is not allowed to Skateboard. the average age of a Skateboarder is around 12-14 years old. Canada’s Deanna Stellato-Dudek is the oldest skateboarder who Skateboards at the age of 39 years.